[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. Before operating the receiver, check that the operating voltage is identical with your local power supply. [. . . ] Uses 3D sound imaging to create 1 set of virtual rear speakers from the sound of the front speakers without using actual rear speakers. Uses 3D sound imaging to create virtual rear speakers from the sound of the front speakers without using actual rear speakers. Reproduces the sound characteristics of the "Cary Grant Theater" and creates 5 sets of virtual speakers surrounding the listener at a 30° angle of elevation from the sound of the front speakers without using actual rear speakers. Reproduces the sound characteristics of the "Kim Novak Theater" and creates 5 sets of virtual speakers surrounding the listener at a 30° angle of elevation from the sound of the front speakers without using actual rear speakers. adds the 3D sound imaging of VIRTUAL SEMI-MULTI DIMENSION to CINEMA STUDIO C. Reproduces the sound characteristics of the scoring stage and creates 5 sets of virtual speakers surrounding the listener at a 30° angle of elevation from the sound of the front speakers without using actual rear speakers. Be sure to set the game machine to stereo mode when using game software with stereo sound capabilities. AUTO FORMAT DECODING Automatically detects the type of audio signal being input (Dolby Digital, DTS, Dolby Pro Logic, or standard 2-channel stereo) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/encoded, without adding any effects. Set the equalizer to OFF while using this mode to hear the source sound exactly as it was recorded. The effects provided by VIRTUAL THEATER A, B, and C sound fields may cause increased noise in the playback signal. 1 OPTICAL Lights up when the source signal is a digital signal being input through the OPTICAL terminal. 2 COAXIAL Lights up when the source signal is a digital signal being input through the COAXIAL terminal. 3 a DIGITAL This indicator lights when the sound field is on and the unit is decoding signals recorded in the Dolby Digital (AC-3) format. 4 Playback channel indicators The letters light to indicate the channels being played back. L: Front Left R: Front Right C: Center (monaural) LS: Left Surround RS: Right Surround S: Surround (monaural or the rear components obtained by Pro Logic processing) The boxes around the letters light to indicate the speakers used to playback the channels. " light up when the disc being played contains the LFE (Low Frequency Effect) channel. When the sound of the LFE channel signal is actually being reproduced, the bars underneath the letters lights up to indicate the level. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. WOOFER Lights when sub woofer selection is set to "YES" and this unit detects that the disc being played does not contain the LFE channel signal. While this indicator is lit, this unit creates a sub woofer signal based on the low frequency components of the front channels. 9 PRO LOGIC Lights when this unit applies Pro Logic processing to two channel signals in order to output the center and surround channel signals. [. . . ] P Avstånd till bakhögtalare (REAR) Initialläge: 3, 5 m Ställ in avståndet från sittplatsen till bakhögtalarna (den vänstra eller högra). Avståndet från bakhögtalarna till sittplatsen får inte vara längre än avståndet från sittplatsen till framhögtalarna. Avståndsgränsen från sittplatsen till centerhögtalaren är avståndet till framhögtalarna minus 1, 5 m. Avståndsgränsen till bakhögtalarna är avståndet till framhögtalarna minus 4, 5 m. [. . . ]